DIY: Wiring Meter Daihatsu Mira L2

Recently came across a good information from the net. It is a wiring conversion information from Perodua Kancil to Daihatsu Mira L2. For those Perodua Kancil 660 owner who wish to convert their meter to Mira L2, they may refer to the table below after the jump. For the RPM meter, you may tap the wiring to the air condition controller which located behind the drawer.



Daihatsu Mira L2

Green Black(Left Signal)
Orange(Ground)
Green Blue(Check Engine)
Yellow White(Turbo)
White Red(Battery)
Orange Black(Seat Belt)
Red Whiteh(IG+)
Yellow Red(Engine Oil Check)
Red (Handbrake)
Brown(Speedo Meter 20)
Green(Light)(Speedo Meter 0)
Red Green (High Beam)
Green (Right Signal)

Yellow Blue (FU)
Black Red (A)
Red Blue (Bulb)
White Black (Ground)
Brown White (Ground)
Yellow (TU)

Read The Full Article:
http://www.ben9166.com/2010/03/diy-wiring-meter-daihatsu-mira-l2.html

Add to del.icio.us

Digg this

Post to Furl

Add to reddit

Add to myYahoo!